DIY Dialog

Locating and removing an Oil Sending Unit in a 2007 Ford 500 with a 3.0L V6

  • Any help with this would be appreciated. Nothing that helps me on the internet, so I purchased this book online and all it tells me to do is pull the whole motor, not happy with my decision at this moment. Hope someone can make me feel better about forking out $30 when I could have put that toward paying to have this done.

  • Hi there.

    We've emailed you the Oil Pressure Sender location and procedure to remove and install it.

    It is not necessary to pull the whole motor.

    We've addressed the issue in the database so the information will be accessible for the 2007 Ford Five Hundred.

  • Thank you very much this was a tremendous help and made my investment worth the money. Now onto the next project.

  • You are welcome.

  • I also have a 2007 ford five hundred & can't find any information on where it is located & how to replace it, other than removing the engine. I would appreciate any help & information that I can get. Thanks in advance.